d. Verify that the iVu BCR receives and transmits data correctly.
4. Enable Data Export over the serial connection.
a. Go to Main Menu > System > Communications > Data Export > Connection and select Serial I/O from the
drop-down.
Figure 77. Connection Screen
b. Go to Main Menu > System > Communications > Data Export > Data To Export and select the inspection
data to export.
Figure 78. Data to Export Screen
c. Go to Main Menu > System > Communications > Data Export > Output Format and select the Start String,
Delimiter, and End String.
Figure 79. Output Format Screen
d. Go to Main Menu > System > Communications > Data Export > Advanced.
Figure 80. Advanced Screen
iVu Plus BCR Gen2 Series Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767 79
To Next Page
Loading...
