3. Physical Installation
If app lied in a motion rig, care must be taken to stay within the environm ental specifications for vib ration and
shock. It may also be necessary to use additional, custom means to stabilize the projection lens to m ake sure
that the projected image remains in position and properly focused.
3.6 Projector safe attachment points
About
Due to use of a Rigging Frame or other equipmen t, the projector h as som e defines anchor points that shall be used. See the
illustration below.
Note that there is only this 4 selected attachment points that is approved as anchor points for the unit.
Anchorpoints.
For attaching to rigging frame or similar.
1
Image 3-3
Item Thread Dimension Max Ho le Depth Application
1 M6 15mm Anchorpoint / Ceiling / Rig
Mount
601–0442 BALDER 13/09/2017 23
To Next Page
Loading...
