Barco Balder User Manual

1. Safety
1. SAFETY
About this chapter
Read this chapter thoroughly before attempting to install or operate the projector.
To prevent personal injury to users or physical dam age to the projector while installing and using your projector, ensure that yo u
understand and follow all safety guidelines, instructions and w arnings inc luded in this chapter and this manual.
Clarification of the term ’Balder’ used in this document
When referring in this manual to the term, ’B alder ’, means that the content is applicable for the foll
owing products:
• Balder
Model certification name
The Balder products in general, are all p roducts within the Barco GP7 Platform
Overview
• General considerations
• Important safety instructions
• Projector Hazard Distances
• Safety sym bols
• RoHS compliance
• Contact adresses
• Product Info
• Statement
1.1 General considerations
WARNING: Be aw are of suspended Loa ds.
WARNING: Wear a h ard hat to reduce the risk of perso nal injury.
WARNING: Be careful while working with heavy loads
WARNING: Mind your fing ers while working with heavy loads.
Notice on optical radiation from Balder Proje ctor
When installing an interchangeable lens with a throw ratio that make the projector becom e an RG3 unit, (See
the chapter “Approved Le nses” in the installati
on manual), refer to ch apter "Risk Group 3 Safety", page 51
regarding precautions.
601–0442 BALDER 13/09/2017 3

Barco Balder Specifications

General

Projection technology	DLP
Contrast ratio (typical)	1800:1
Projector native resolution	2160p (3840x2160)
Embedded web server	Yes
Serial interface type	RS-232, RJ-45
Noise level	36 dB
AC input voltage	100 - 240 V
Power consumption (max)	1100 W
Light source type	Laser
Service life of light source	60000 h

Weight and Dimensions

Depth	588 mm
Width	475 mm
Height	286 mm
Weight	37000 g