System manual Coronis 5MP 119
“Update Device...”“Update Device...”
“Update Device...”“Update Device...”
“Update Device...” Button: Clicking this button will run the BarcoMed
Hardware Configuration Wizard. This program allows the user to
flash update the firmware stored in the ROM of the currently selected
BarcoMed Display Controller. The BarcoMed Hardware Configuration
Wizard is a “wizard style” application that uses dialog boxes to guide
the user through the flash update procedure. The user will be
prompted to select a firmware update file to use for the update
therefore you will need a firmware update file for your specific
BarcoMed Display Controller in order to update it’s firmware. This file
will be provided by BarcoView MIS if and when a firmware update is
required.
SS
SS
S
pecial Note:pecial Note:
pecial Note:pecial Note:
pecial Note: The BarcoMed Hardware Configuration Wizard is
applicable only for AURA-based Display Controller(s).
BarcoMed software driver installation
To Next Page
Loading...
