System manual Coronis 5MP 45
SOFTWSOFTW
SOFTWSOFTW
SOFTW
ARE INSTARE INST
ARE INSTARE INST
ARE INST
ALLAALLA
ALLAALLA
ALLA
TIONTION
TIONTION
TION
OverviewOverview
OverviewOverview
Overview
The BarcoMed Software Installation section has been divided into
three sections, one for each of the three supported versions of the
Windows operating system. They are: Windows NT 4.0, Windows
2000 and Windows XP.
SoftwareSoftware
SoftwareSoftware
Software
In addition to the device drivers for your BarcoMed Display
Controller(s), your BarcoMed Software CD also includes several
additional tools. They are: the BarcoMed Driver Tab, the BarcoMed
Hardware Tab, the BARCO DPMS Screen Saver and the CORONIS
Rotation Service. The BarcoMed Driver Tab and the BarcoMed
Hardware Tab are automatically installed with BarcoMed Display
Controller driver and become part of the Windows Display Control
Panel. The BARCO DPMS (Display Power Management Signaling)
Screen Saver and the CORONIS Rotation Service are optional tools
which must be installed separately.
The BarcoMed Driver Tab helps you manage the special features of
your BarcoMed Display Controller(s). The BarcoMed Hardware Tab
gathers information about the BarcoMed Display Controller(s) and
your system that is useful when diagnosing problems. The BarcoMed
Hardware Tab can also be used to update the firmware on the AURA
video chipset based BarcoMed Display Controller. The BARCO
DPMS Screen Saver allows the user to set power and monitor saving
features for medical monitors driven by BarcoMed Display
Controller(s). At the end of the workday, the monitor will enter certain
DPMS states as requested by the imaging board. The CORONIS
Rotation Service detects changes in the physical orientation of the
rotatable CORONIS flat-panel displays and changes the resolution of
the display to match the physical orientation.
SS
SS
S
pecial Note: pecial Note:
pecial Note: pecial Note:
pecial Note: The CORONIS Rotation Service requires the Portrait
Accelerator (PA) Option in order to function. The PA is included with
the CORONIS 5MP & 3MP Flat Panel Displays and is available as an
option for the CORONIS 1MP and 2MP Flat Panel Displays.
BarcoMed Software Installation WizardBarcoMed Software Installation Wizard
BarcoMed Software Installation WizardBarcoMed Software Installation Wizard
BarcoMed Software Installation Wizard
The BarcoMed Software Installation Wizard is a Graphic User
Interface (GUI) designed to install the BarcoMed Display Controller
Driver, the BARCO DPMS Screen Saver and the CORONIS Rotation
Service in a single operation prior to rebooting. The user may also
BarcoMed software driver installation
To Next Page
Loading...
