System manual Coronis 5MP 96
If the Wizard failed to successfully install the drivers for all of the
displays supported by your BarcoMed Display Controller(s), the
Wizard will advise you that the installation failed (see figure 75).
Click
“Finish”“Finish”
“Finish”“Finish”
“Finish” to exit the Driver Install Wizard and to return to the
BarcoMed Product Install Wizard.
After returning to the BarcoMed Product Install Wizard Welcome
Screen, the wizard will automatically begin installing the next
selected piece of BarcoMed Software. If you are working with the
default selections, this will be the BARCO DPMS InstallShield
Wizard, click
“Cancel”“Cancel”
“Cancel”“Cancel”
“Cancel”. The wizard will ask you to confirm that
you want to cancel the DPMS installation. Click
“Y“Y
“Y“Y
“Y
es”es”
es”es”
es” and then
click
“Finish”“Finish”
“Finish”“Finish”
“Finish”. The BARCO DPMS InstallShield Wizard will exit
and return to the BarcoMed Product Install Wizard Welcome
Screen. The wizard will then automatically launch the CORONIS
Rotation Service Install Wizard, click
“Cancel”“Cancel”
“Cancel”“Cancel”
“Cancel”. The wizard will
ask you to confirm that you want to exit the CORONIS Rotation
Service setup, click
“Exit Setup”. “Exit Setup”.
“Exit Setup”. “Exit Setup”.
“Exit Setup”. The wizard will exit and return
you to the BarcoMed Product Installation Wizard. Then click
“Back”“Back”
“Back”“Back”
“Back” and try reinstalling the drivers following the steps above or
using the steps outlined in “Reinstalling or Updating your
BarcoMed Drivers” section found later in this chapter.
Figure 75
BARCO DPMS Screen Saver InstallationBARCO DPMS Screen Saver Installation
BARCO DPMS Screen Saver InstallationBARCO DPMS Screen Saver Installation
BARCO DPMS Screen Saver Installation
17. Click
“Next”“Next”
“Next”“Next”
“Next” on the Welcome Screen of the BARCO DPMS
InstallShield Wizard to begin the installation (figure 76 on the next
page). Click
“Cancel”“Cancel”
“Cancel”“Cancel”
“Cancel” to cancel the DPMS installation and return
to the BarcoMed Product Install Wizard.
BarcoMed software driver installation
To Next Page
Loading...
