Barco Coronis 5MP - Advanced Functions in the Luminance Menu; The Luminance Menu Contains the Following Advanced Function; Advanced Functions in the Settings Menu; The Settings Menu Contains the Following Advanced Functions

System manual Coronis 5MP 35
Advanced functions in the Luminance menuAdvanced functions in the Luminance menu
Advanced functions in the Luminance menuAdvanced functions in the Luminance menu
Advanced functions in the Luminance menu
The Luminance menu contains the following advancedThe Luminance menu contains the following advanced
The Luminance menu contains the following advancedThe Luminance menu contains the following advanced
The Luminance menu contains the following advanced
function:function:
function:function:
function:
Manual Backlight ..... This function allows to manually control the
backlight luminance. When you control the
Manual Backlight function, the Luminance target
function and I-Guard control are disabled.
ImportImport
ImportImport
Import
ant:ant:
ant:ant:
ant: Disabling the I-Guard results in an
uncalibrated and not stabilized backlight.
After switching the power off and on again, the
Luminance target and I-Guard control are acti-
vated again. This is also the case when you
control the Luminance function again.
Advanced functions in the Settings menuAdvanced functions in the Settings menu
Advanced functions in the Settings menuAdvanced functions in the Settings menu
Advanced functions in the Settings menu
The Settings menu contains the following advanced functions:The Settings menu contains the following advanced functions:
The Settings menu contains the following advanced functions:The Settings menu contains the following advanced functions:
The Settings menu contains the following advanced functions:
Panel position ......... Click to select the desired option:
-
Auto: Select if the display will be used in both
portrait and landscape orientation.
- Portrait: Select if the display is always used in
portrait orientation.
- Landscape: Select if the display is always
used in landscape orientation.
Auto Rotation .......... When switched on, the image will be rotated
automatically when switching between portrait or
landscape orientation.
DVI input ................. Click to switch between normal DVI signal, Dual10
DVI signal or automatic detection of the DVI
format.
Stabilizer ................. Click to switch the backlight stabilizer on/off
Patch ....................... Click to hide/display the I-Guard patch. When you
hide the patch, the I-Guard will not function
properly anymore
Burn-In Mode .......... When switched on, the display will generate a
white image when the video cable is unplugged
ImportImport
ImportImport
Import
ant:ant:
ant:ant:
ant: Disabling the I-Guard results in an uncontrolled image
performance.
Display installation