Barco Coronis 5MP - PCI Information; Firmware Information

System manual Coronis 5MP 118
PCI InformationPCI Information
PCI InformationPCI Information
PCI Information
Device ID:Device ID:
Device ID:Device ID:
Device ID: Displays the device’s PCI Device ID number.
VV
VV
V
endor ID:endor ID:
endor ID:endor ID:
endor ID: Displays the device manufacturer’s PCI Vendor ID
number.
Subsystem ID:Subsystem ID:
Subsystem ID:Subsystem ID:
Subsystem ID: Displays the device’s PCI Subsystem ID number.
SubsystemVSubsystemV
SubsystemVSubsystemV
SubsystemV
endorID: endorID:
endorID: endorID:
endorID: Displays the device’s PCI Subsystem Vendor
ID number.
VGAVGA
VGAVGA
VGA
S S
S S
S
tt
tt
t
atus:atus:
atus:atus:
atus: Displays whether the VGA capabilities of the BarcoMed
controller are enabled or disabled.
Firmware Information Firmware Information
Firmware Information Firmware Information
Firmware Information
Product Name: Product Name:
Product Name: Product Name:
Product Name: Displays the name of the BarcoMed Display
Controller installed in the selected PCI slot.
Serial Number: Serial Number:
Serial Number: Serial Number:
Serial Number: Displays the serial number of the BarcoMed Display
Controller installed in the selected PCI slot.
VGAVGA
VGAVGA
VGA
Bios V Bios V
Bios V Bios V
Bios V
ersion:ersion:
ersion:ersion:
ersion: Displays the VGA Bios version for the BarcoMed
Display Controller installed in the selected PCI slot.
Firmware VFirmware V
Firmware VFirmware V
Firmware V
ersion:ersion:
ersion:ersion:
ersion: Displays the firmware version for the BarcoMed
Display Controller installed in the selected PCI slot.
Hardware VHardware V
Hardware VHardware V
Hardware V
ersion:ersion:
ersion:ersion:
ersion: Displays the Hardware Version for the BarcoMed
Display Controller installed in the selected PCI slot.
“Advanced ...”“Advanced ...”
“Advanced ...”“Advanced ...”
“Advanced ...” Button: By clicking on this button, the user can
display more information about the BarcoMed Display Controller
installed in the selected PCI slot.
“Generate Report”“Generate Report”
“Generate Report”“Generate Report”
“Generate Report” Button: Clicking this button will produce two
reports. It will first run the Windows Diagnostics program which will
generate a report that is saved to a text file. For Windows XP and
Windows 2000, this file will be saved on the c:\ drive and it will be
named BarcoMedSystemReport.txt. For Windows NT 4.0, this file will
be saved on the desktop and it will have the same name as the
machine for which the report is being generated. The other report that
is generated contains information about the Barco display adapters
installed in the system and will be named BarcoMedDeviceInfo.txt.
This report will be saved on the desktop. These files can be emailed
to our customer support department when reporting a problem. To
locate the closest BarcoView Support office, see the Support section
on www.barcomedical.com. If your system is connected to the internet
and a web browser is installed you can click on the link at the top of
the BarcoMed Hardware Tab to get to our web site.
BarcoMed software driver installation