Barco Coronis 5MP - Using the BARCO Display Tab; Displays

To Next Page

To Previous Page

System manual Coronis 5MP 122

Display you are working with to bring up its properties page. Click on

the “BARCO Display” tab (figure 97).

Figure 97: BARCO Display Tab under Windows 2000 and Windows XP

Using Using

Using

The BARCO Display The BARCO Display

The BARCO Display

abab

DisplaysDisplays

Displays

All of the available display adapters that are of the same type as the

current Barco display controller are shown here graphically, with one

display icon representing each port of a display adapter. The icon

orientation reflects the display resolution. Only those ports with a

display attached to them are active. If an icon is grayed out, that

indicates a port with no head attached to it. When running DualView

under Windows 2000 and Windows XP the desktop must be extended

to include each display, otherwise those ports will not be visible to the

BARCO Display Tab.

BarcoMed software driver installation

Other manuals for Barco Coronis 5MP