System manual Coronis 5MP 32
• Some adjustments can be made by changing an adjustment value.
To change an adjustment value:
- Turn the control wheel to select the adjustment.
- Click the wheel shortly. A pointer appears next to the
adjustment name.
- Turn the wheel to change the value.
- Click the wheel shortly to confirm the change. The pointer
disappears again.
• Some adjustments can be made by selecting from a range of
predefined settings. To change the selection:
- Turn the control wheel to select the adjustment.
- Click the wheel until the desired setting appears in the menu.
Saving changesSaving changes
Saving changesSaving changes
Saving changes
When you change a setting value, the change is automatically saved
immediately.
Setting the Luminance valueSetting the Luminance value
Setting the Luminance valueSetting the Luminance value
Setting the Luminance value
With this function, the backlight value is stabilized by the I-Guard
sensor. The value you enter is the target backlight luminance, ex-
pressed in Cd/m². This luminance value will be established by the I-
Guard control circuit.
Proceed as follows:
1 In the main menu, turn the control wheel to select the Luminance
menu.
MAIN MENU
Luminance
Settings
Information
EXIT
2 Click the control wheel. The Luminance menu appears.
3 Turn the control wheel to select the Luminance function.
4 Click the control wheel. A pointer appears at the left of the menu.
5 Turn the control wheel to adjust the Luminance Target value.
6 Click the control wheel to confirm the adjustment.
7 Turn the control wheel to select Exit.
8 Click the control wheel to return to the main menu.
Display installation
To Next Page
Loading...
