Barco Coronis 5MP - Running Multiple Barcomed 5 MP2 F Display Controllers in a Single Host20

System manual Coronis 5MP 20
Running Multiple BarcoMed 5MP2F Display Controllers in aRunning Multiple BarcoMed 5MP2F Display Controllers in a
Running Multiple BarcoMed 5MP2F Display Controllers in aRunning Multiple BarcoMed 5MP2F Display Controllers in a
Running Multiple BarcoMed 5MP2F Display Controllers in a
Single HostSingle Host
Single HostSingle Host
Single Host
The physical order of the displays may vary when you are running
multiple BarcoMed 5MP2F display controllers. This is due to the PC’s
PCI bus control in the system BIOS, and not the BarcoMed display
controller. It may become necessary, depending on how your PC’s
BIOS configures the PCI bus, to switch your DVI display connections
to achieve a linear desktop configuration.
Imaging board installation