System manual Coronis 5MP 23
Read the safety and operating instructions
before operating the apparatus.
Retain safety and operating instructions for
future reference.
Adhere to all warnings on the apparatus and
in the operating instructions manual.
Follow all instructions for operation and use.
This appThis app
This appThis app
This app
aratus conforms toaratus conforms to
aratus conforms toaratus conforms to
aratus conforms to: CE, IEC
60950, UL 60950, CAN/CSA C22, 2 No.950-95
Usage in Hazardous locationsUsage in Hazardous locations
Usage in Hazardous locationsUsage in Hazardous locations
Usage in Hazardous locations
Class I equipment
Equipment not suitable for use in the presence
of a flammable anesthetic mixture with air or
with oxygen or nitrous oxide.
FCC noticeFCC notice
FCC noticeFCC notice
FCC notice
This equipment has been tested and found to
comply with the limits of a class A digital
device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual,
may cause harmful interference to radio
communications. Operation of this equipment
in a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
Power connectionPower connection
Power connectionPower connection
Power connection
• Power requirements: The apparatus must
be powered using the 12 VDC power supply
that is supplied with the apparatus.
The 12 VDC power supply must be powered
by the AC mains voltage.
• Power cord with CEE 7 plug ( ): The colors
of the mains lead are colored in accordance
with the following code: Green-and-yellow:
Earth (safety earth), Blue: Neutral, Brown:
Line
• Power cord with ANSI 73.11 plug ( ): The
wires of the power cord are colored in
accordance with the following code: Green/
yellow: ground, White: neutral, Black: line
(live)
• Power requirements: connect the apparatus
to an AC voltage as indicated at its back. Using
a lower voltage, the apparatus will not be able
to operate. Using a higher voltage may
damage the apparatus. If you are not sure of
the type of power supplied, consult the power
company.
• Do not overload wall outlets and extension
cords as this may result in fire or electric
shock.
• Mains lead protection (U.S.: Power cord):
Supply cords should be routed so that they
are not likely to be walked upon or pinched
by items placed upon or against them, paying
particular attention to cords at plugs and
receptacles.
WW
WW
W
ater and moistureater and moisture
ater and moistureater and moisture
ater and moisture
Never expose the apparatus to rain or
moisture.
Never use the apparatus near water - e.g. near
a bathtub, washbasin, swimming pool, kitchen
sink, laundry tub or in a wet basement.
VV
VV
V
entilationentilation
entilationentilation
entilation
Do not cover or block the ventilation openings
in the cover of the set. When installing the
apparatus in a cupboard or another closed
location, heed the necessary space between
the set and the sides of the cupboard.
InstInst
InstInst
Inst
allationallation
allationallation
allation
Place the apparatus on a flat, solid and stable
surface that can bear the weight of at least 3
monitors. If you use an unstable cart or stand,
the set may fall, causing serious injury to a
child or adult, and serious damage to the
equipment.
More warnings in the Installation chapter.
SAFETY INSTRUCTIONSSAFETY INSTRUCTIONS
SAFETY INSTRUCTIONSSAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
Display installation
To Next Page
Loading...
