Barco Coronis 5MP

To Next Page

To Previous Page

System manual Coronis 5MP 42

CONTROLSCONTROLS

CONTROLS

• On-Screen Display (OSD)

• Rotary / push control wheel to navigate through the OSD

POWER SUPPLYPOWER SUPPLY

POWER SUPPLY

• Input for 12V power supply unit: 90 - 264 Vac

• Input for display: 12VDC (The supplied 12VDC power supply must

be used)

APPROVALSAPPROVALS

APPROVALS

CE, IEC 60950, UL 60950, CAN/CSA C22, 2 No.950-95

DIMENSIONSDIMENSIONS

DIMENSIONS

H x W x D:H x W x D:

H x W x D:

371 x 444 x 90 mm

(14.6 x 17.5 x 3.5 inch)

Due to our policy of continuous product improvement, the above specifications areDue to our policy of continuous product improvement, the above specifications are

Due to our policy of continuous product improvement, the above specifications are

subjected to change without notice. Barco shall not be liable for technical orsubjected to change without notice. Barco shall not be liable for technical or

subjected to change without notice. Barco shall not be liable for technical or

editorial errors or omissions conteditorial errors or omissions cont

editorial errors or omissions cont

ained herein; nor for incidentained herein; nor for incident

ained herein; nor for incident

al or consequentialal or consequential

al or consequential

damages whatdamages what

damages what

soever resulting from furnishing, performance or use of this material.soever resulting from furnishing, performance or use of this material.

soever resulting from furnishing, performance or use of this material.

Display installation