Barco DP-1500 - Replacement of the Dust Filter on the Top Side

11. Maintenance
11.5 Replacement of the dust filter on the top side
Necessary parts
New HEPA dust filter for the top side.
How to replace the HEPA dust filter on the top side of the projector ?
1. Remov e the side cover of the projector.
2. Remov e the filter (F) on the bottom side by pulling out the filter holder ( H) as illustrated.
F
H
Image 11-6
3. Place a new HEPA dust filter in the filter holder.
4. Reinstall the filter holder containing the new HEPA filter.
5. Reinstall the side cover of the projector.
CAUTION: Never install a used HEPA filter. Always install a new HEPA filter.
R59770091 DP-1500 06/01/2009 97