13. Removal and installation of projector covers
13.4 Removal of the side cover
Necessary tools
7mmflat screw driver.
How to remove the side cover of the projector?
1. Release the captive screw at the middle bottom of the side cover, us ing a flat scre w drive r.
Image 13-7
2. Remov e the side cover from the projector doing the following:
a) gen tly pull out the bottom corners (A ) of the side cover,
b) then gently pull out the top corners (B) of the s ide cover,
c) then move the side c over away from the projector (C).
B
B
A
A
C
Image 13-8
R59770091 DP-1500 06/01/2009 127
To Next Page
Loading...
