Barco DP2K-S Series User Manual

14. Maintenance procedures
6. Install the dust filter assembly back at the front side of the projector. Use a 7mm flat screwdriver to fasten the two captive screws.
Ensure that the two mounting lips (reference 2 image 14-1) of the assemb ly are engaged in the projector chassis.
The dust filter is cleanable. See proced ure "Washing and drying the dust filters", pag e 111, for correct cleaning
and drying instructions.
R5977692 DP2K-S SERIES 10/12/2012 107

Barco DP2K-S Series Specifications

General

Brand	Barco
Model	DP2K-S Series
Category	Projector
Language	English