Barco DP4K Series User Manual

5. Installation
Image 5-65
Delete functionality key
5.9.9.2 Request for new keys
What can be done ?
When changing the Input & communication unit, a code must be entered before you can continue using
your projector. This code contains the run time and the different keys necessary for your projector. This
unique code can only be generated by Barco. Therefore, copy the UN code and send it to Barco.
How to enter a new PM code
1. While in the Advanced tab page, tip on Edit functionality keys (1). (image 5-66)
The functionality keys window opens with the current active keys (2).
2. Copy the unique UN code and send this code to Barco (3).
This code contains the serial number and the installed keys. A new code will be generated by Barco.
3. When the new code is arrived, go back to the Functionality keys window. Tip first the Shift button and
then double tip on the word serial number.(4)
The programing mode window opens (5).
4. Enter the new code exactly as you received it (6) and tip Program now (7).
The new keys are activated.
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012
187

Barco DP4K Series Specifications

General

Brand	Barco
Model	DP4K Series
Category	Touch Panel
Language	English