8. Macro editor
Image 8-13
Select PCF file
8.4.1.4 Activate 3D file
What can be done ?
Theactive3Dfile (containing the 3D settings for the selected source) can be installed in the projector via
the Activate PCF file command.
How to select a file
1. Tip on Activate 3D file. (image 8-14)
The right pane shows the current selected file.
2. Tip on Select file.
A files overview window is displayed. (image 8-15)
3. Select the desired file out of the list and tip OK.
Or,
double tip on the desired file.
The selected file name appears next to Filename.
Image 8-14
Activate 3D file
R59770488 COMMUNICATOR TOUCH PANEL 06/06/2012 257
To Next Page
Loading...
Need help?
General
