4. Lamp & Lamp House
Image 4-26
Reset lamp info, new lamp
A R eset lamp parameters selection window opens (2).
2. To get new lam ps, click on From new list (3).
The lamp article and serial n umber opens (4).
3. Fill out the article number of the new lamp (5a)
Or,
click on Select (5b) to display a list of possible article numbe rs (6). Select a article number (7) and click OK (8).
The software w ill check if the entered article number is a valid number (9).
4. Fill out the serial number of the lamp (10).
5. C lick Reset lamp (11).
For a used l amp, how to set back the original values
1. W hile the Lamp information window is displayed, click on Change lamp (1 ).
R5905067 DPXK-19B/23B/P 17/09/2012
41
To Next Page
Loading...
Need help?
General
