Need help?Do you have a question about the Barco SP4K-B and is the answer not in the manual?
General| Resolution | 4096 x 2160 |
|---|---|
| Contrast Ratio | 2000:1 |
| Light Source | Laser Phosphor |
| Projection Technology | DLP |
| Lamp life | 30, 000 hours |
| Input Connectors | HDMI |
Provides general safety instructions, notice on safety, optical radiation, restricted access, and user definitions.
Details instructions to prevent electrical shock, such as proper grounding, wiring, and avoiding hazards.
Highlights safety labels related to light beams and electrical hazards on the projector.
Explains Hazard Distance (HD) and Restriction Zone (RZ) for high brightness lasers to ensure user safety.
Discusses Hazard Distance (HD) for enclosed projection, considering reflected and diffuse light.
Illustrates the relationship between Hazard Distance (HD) and throw ratio for different projector models.
Details environmental conditions, altitude, and power requirements for projector installation.
Provides step-by-step instructions and required tools for safely unpacking the projector.
Guides through the process of safely unpacking the external cooler for the SP4K-55B.
Outlines general checks and mechanical inspections after unpacking the projector.
Defines conventions for projector orientation and identifies key sides and the external cooler.
Explains the air flow paths for the projector and the external cooler to ensure proper ventilation.
Introduces the built-in web application for projector setup, control, and configuration.
Describes the screen management system with an intuitive user interface for projector control.
Details optional exhaust adapters for connecting an air extraction system to the projector.
Provides an overview of the installation stages, serving as a checklist for setup.
Guides on positioning the projector, including general guidelines, centering, and tilting.
Details how to access the projector's power connections by removing the net input cover.
Explains how to configure the projector's power input for Y, Delta, or Mono phase connections.
Provides instructions for connecting the projector to the main AC power supply.
Details how to connect a UPS unit to power the projector's electronics.
Explains how to connect the external cooler to the SP4K-55B projector using specific kits.
Lists active lenses available for the projector and provides their order numbers and throw ranges.
Guides on how to select the appropriate lens using the Barco Lens calculator tool.
Provides step-by-step instructions for installing a lens into the B-lens holder.
Details the procedure for safely removing a lens from the projector's lens holder.
Explains how to adjust lens shift, zoom, and focus using the projector's motorized functionality.
Introduces the Scheimpflug principle for adjusting the sharp focus plane of the projected image.
Details the preparation steps and procedure for performing the Scheimpflug adjustment.
Describes the Input & Communication side, including touch display, card cage, and ICMP-X.
Details the control panel, LAN/WAN ports, GPI/GPO ports, and 3D interface.
Explains ICP-D functions, licensing, and supported Integrated Media Blocks (IMBs).
Provides an overview of the ICMP-X, its front plate, and storage controller.
Explains ICMP-X HDD configuration, RAID 5, degraded mode, and recovery processes.
Details scenarios for replacing HDDs on ICMP-X, covering data continuity and RAID initialization.
Locates and describes the functionality of ICMP-X communication and input ports.
Provides an overview of the PWR/ERROR and READY LEDs on the ICMP-X front panel.
Explains HDD I/O and RAID LEDs, offering troubleshooting for common HDD status issues.
Explains the purpose of the device certificate for ordering KDMs and playing DCPs.
Details parameters for configuring ICMP-X, including global, user, server, and player settings.
Describes ICMP-X reset possibilities: reboot button and hardware reset button.
Guides on how to download the ICMP-X certificate using a QR code or control software.
Provides step-by-step instructions for removing a HDD from the ICMP-X.
Details the procedure for installing a HDD into the ICMP-X, including RAID considerations.
Explains the different projector power states (OFF, ECO, READY, ON) and their behavior.
Details methods for switching the projector ON locally or remotely.
Describes preferred methods for shutting down the projector to ECO mode or OFF mode.
Guides on connecting to the projector, including default settings and passwords.
Provides instructions for updating projector software via the Barco website or USB device.
Details steps for opening the projector's sealed compartment for convergence adjustment.
Provides instructions for correctly closing the projector's sealed compartment.
Identifies the control knobs used for convergence adjustment on the projector.
Guides on aligning the blue pattern with the red pattern for convergence.
Guides on aligning the green pattern with the red pattern for convergence.
Outlines the steps for creating lens files, calibrating light source, and color gamut.
Explains how to calibrate the projector's white point for DCI standard compliance.
Details how to apply color correction to match the target color gamut for cinema content.
Instructions for removing the projector's front cover.
Instructions for removing the projector's rear cover.
Instructions for removing the projector's mains side cover.
Instructions for removing the projector's operator side cover.
Instructions for removing the sealed compartment side cover.
Instructions for removing the projector's light source side cover.
Instructions for removing the small rear cover (optional).
Instructions for removing the projector's top cover.
Instructions for mounting the projector's top cover.
Instructions for mounting the projector's light source side cover.
Instructions for mounting the sealed compartment side cover.
Instructions for mounting the projector's operator side cover.
Instructions for mounting the projector's mains side cover.
Instructions for mounting the projector's rear cover.
Instructions for mounting the projector's front cover.
Provides detailed dimensions of the projector, including views with exhaust adapters.
Shows the dimensions of the universal pedestal for projector mounting.
Displays the dimensions of the external cooler unit.
To Next Page
