Site~Rite
®
8 Ultrasound System Page 11
3. PHYSICAL FEATURES
3.1. Console Features
For installation of approved mounting accessories, please see the appropriate assembly instructions.
Caution: When attaching the system to the roll stand or kickstand, do not over tighten the screws; doing so may
damage the system.
Caution: Use only the screws provided in the packaging. Ensure the unit is secure against the roll-stand or
kickstand mount. Failure to do so may cause the display to disconnect from the mount.
Kensington Slot
(for security cable)
Probe Connector
(if applicable)