Bard Site-Rite 8 - 24 Technical Specifications

Site~Rite
®
8 Ultrasound System Page 75
24. TECHNICAL SPECIFICATIONS
Operating and Storage Conditions
Operating Temperature
50° F to 104° F (10°C to 40°C)
Storage Temperature
-0° F to 104° F (-18°C to 40°C)
Operating Humidity
≤ 90% Relative Humidity (non-condensing)
Storage Humidity
≤ 95% Relative Humidity (non-condensing)
Pinpoint™ GT Needle Technology Operating and Storage Conditions (if enabled)
Operating Temperature
50° F to 90° F (10°C to 32°C)
Storage Temperature
-0° F to 104° F (-18°C to 40°C)
Operating Humidity
≤ 85% Relative Humidity (non-condensing)
Storage Humidity
≤ 95% Relative Humidity (non-condensing)
If operating the device in temperatures exceeding 90°F (32°C), the battery charging functionality may be
disabled to protect the battery. To charge the battery in temperatures exceeding 90°F (32°C), the system
may need to be turned off.
System Specifications
Dimensions
12in x 9in x 2.5in (30cm x 22cm x 6cm)
Weight
5.4 lb (2.4kg)
Power Sources
A/C adapter, Internal Battery Pack
Power Consumption
60 Watts
IEC 60601-1
Class II, Type BF Applied Part, Continuous Operation, Internally Powered
Equipment, Not Category AP or APG Equipment, IPX1.
System Battery Specifications
Battery Chemistry
Lithium Ion
Battery Capacity (Full Charge):
6500mAh
Nominal Battery Output Voltage:
10.8VDC
Battery Output Current (Max):
4.5A
System Run Time on Full Charge
Up to 3 Hours
Charge Time (Full)
8.0 Hours
System AC Adapter Specifications
Input voltage
100-240 VAC, 50/60 Hz
Input Current (Max)
1.62A
Output Voltage
15V
Output Current (Max)
4.2A
Probe Specifications - 32mm Linear
Frequency
7.5–10 MHz
Elevation Focus
19mm
Maximum Scan Depth
6cm
Scan Width
32mm
Probe Specifications – Linear 20mm Cue™ Needle Tracking System Probe
Frequency
7.5–13 MHz
Elevation Focus
18mm
Maximum Scan Depth
6cm
Scan Width
20mm
Probe Specifications – Linear 20mm Pinpoint™ GT Needle Technology Probe
Frequency
7.5–10 MHz
Elevation Focus
18mm
Maximum Scan Depth
6cm
Scan Width
20mm
Caution