Network Related Camera Parameters and Managing Bandwidth
Basler pilot 55
make adjustments. In essence, you must lower the data bandwidth needed by one or more of the
cameras and then adjust the data bandwidths assigned so that they reflect the lower bandwidth
needs.
You can lower the data bandwidth needed by a camera either by lowering its frame rate or by
decreasing the size of the area of interest (AOI). Once you have adjusted the frame rates and/or
AOI settings on the cameras, you should repeat steps 2 through 6.
For more information about the camera’s maximum allowed frame transmission rate, see
Section 8.9 on page 102.
For more information about the AOI, see Section 11.6 on page 163.
To Next Page
Loading...
