1.3 About this product
1.3.1 Identifying the product
This manual is applicable for the models and series specified on the title page.
•
Take the exact model and serial number from the type plate and enter into the
figure below.
•
In case of customer service enquiries, always specify the model and serial
number of the product.
Fig. 1 Type plate
1 Model 2 Serial number
1.3.2 Application
The machine is intended exclusively for the compression and the storage of the
medium specified, under consideration of the conditions specified, see Technical
Data.
1.3.3 Scope of supply
The minimum scope of supply comprises:
•
the product
•
all necessary consumable material such as oil and filter (except fuel), filled in
an accessory kit already installed
•
this manual
1 | Preface OPERATING MANUAL
12/150
A_002_en
28.08.2019