Bauer POSEIDON PE 200-TB - Operating the B-TIMER

7.2.5 Operating the B-TIMER
Low
A
B
C
654321
%
h
1
3
7
6
2
5
4
Fig. 17 Display and operating elements
1 Display of due maintenance 5 Input key
2 Display of low battery status 6 Display of cartridge saturation
3 Display of operating hours or car-
tridge number
7 Display of due maintenance type or
the setup menu
4 Selection key
Switching on the B-TIMER
The B-TIMER switches itself on when the compressor is activated. The compressor
operation is indicated in the display of the B-TIMER using a flashing "h".
Press one of the buttons to switch on the B-TIMER without compressor opera-
tion.
Ä
The main menu is displayed.
If no button is actuated within 1 minute, the display reverts to the main menu.
2 minutes without pressing a button and compressor operation causes the B-TIM-
ER to switch off.
OPERATING MANUAL Commissioning and operation | 7
28.08.2019
A_002_en
71/150