EasyManua.ls Logo

Bauer POSEIDON PE 200-TB - Emergency Instructions

Bauer POSEIDON PE 200-TB
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instructions regarding handling combustion engines
Follow the following instructions to ensure the safety of the users:
Do not inhale the exhaust gases.
Combustion engines should never be operated in closed rooms.
Do not operate combustion engines in the proximity of flammable objects.
Do not operate combustion engines in the proximity of persons and animals.
Keep the exhaust free from objects.
Do not top-up the engine fuel tank in enclosed spaces.
Do not open the lid of the fuel tank during operation.
Switch the engine off and allow it to cool down for at least 2 minutes before
topping-up with fuel.
Do not overfill the fuel tank.
If you spill fuel on the engine, carefully wipe away the fuel. Wait until the fuel
has evaporated before commissioning the engine.
Fit the lid back on the fuel tank after topping-up. Ensure it is installed in the
correct position.
Instructions regarding handling breathing air
Follow the following instructions to ensure the safety of the user:
Adhere to the filter service life.
When changing the cartridge, particular attention must be paid to hygiene and
general cleanliness.
Use permissible lubricant and cleaning agent only for breathing air.
Get a replacement cartridge and store it properly.
Keep in mind the storage period of the filter cartridge.
Do not use filter cartridges with damaged packaging.
Record filling processes in a logbook.
Check the air quality or have it checked at regular intervals.
Do not fill breathing air from rooms that are used as a working space.
2.5 Instructions regarding emergency
2.5.1
Behaviour in case of faults and emergencies
If safety-relevant faults occur in the machine or the operating behaviour indicates
this:
Switch off the machine using the emergency stop switch and notify the au-
thority/person responsible of the fault.
Only trained and authorised specialist personnel may rectify the faults.
Restart the machine only after the cause of the fault has been determined and
rectified.
OPERATING MANUAL For your safety | 2
28.08.2019
A_002_en
23/150

Table of Contents

Related product manuals