2.6.2 Personnel selection and qualification
Pay attention to the following points when selecting the personnel:
•
Ensure that statutory minimum age limits are observed.
•
Ensure that only entrusted personnel work on the assigned tasks.
•
Deploy only the trained, instructed or competent personnel.
•
Ensure that only trained personnel operate the machine.
•
Ensure that only the service personnel trained and authorised by
BAUER KOMPRESSOREN carry out the assembly and installation activities.
•
Ensure that only competent personnel carry out the first commissioning and
recurrent tests.
•
Ensure that only trained personnel carry out maintenance activities.
•
Clearly define the responsibilities that personnel have in terms of operation,
maintenance and repairs.
•
Establish who is in charge of the machine and give him/her authorisation to
reject any instructions by third parties that are in breach of safety procedures.
•
Only allow apprentices or other personnel who are undergoing instruction or
general training to work on/use the machine while under constant supervision
by an experienced member of staff.
The qualification and knowledge of personnel can be summarised as follows:
Personnel Qualification
Trained personnel (e.g. operators and employ-
ees)
The manual was read and understood.
Instruction by the manufacturer or a person
authorised by the manufacturer for this pur-
pose.
Trained personnel and/or experts (e.g. expert
electricians and maintenance personnel)
Completed professional education in metal
working and electrical engineering in accord-
ance with the statutory education ordinance
with professional experience and regular fol-
low-up training.
Competent personnel (e.g. service personnel
of BAUER KOMPRESSOREN and experts)
Completed professional education in metal
working and electrical engineering in accord-
ance with the statutory education ordinance
with professional experience, recent profes-
sional activity and regular follow-up training
by a person certified by
BAUER KOMPRESSOREN or by a person certi-
fied by the relevant authority.
Tab. 6 Personnel qualifications
OPERATING MANUAL For your safety | 2
28.08.2019
A_002_en
25/150