Lubrication oil list
The exclusive use of high-quality branded oils is essential because of the thermal
loads encountered in the compressor. In order to ensure perfect operation, we rec-
ommend using only those oils listed below from BAUER in the quoted operating
conditions tested and approved by us.
•
If the compressor unit is operating under difficult conditions, e.g. continuous
running or high ambient temperatures, we recommend exclusive use of the
BAUER
special synthetic compressor oils.
•
When operating under less hard conditions, for intermittent use or when using
with extended standstill times, we can also recommend the use of mineral
oils.
•
These oils have been tried and tested at ambient temperatures listed below.
At low ambient temperatures you will need compressor heating that is capable
of heating the plant up to the permissible ambient temperature.
BAUER special compressor oils
Designation Oil type Permissible type of applica-
tion
Permissible environmental
temperature
N28355
Synthetic oil
•
Breathing air
•
Industrial air
•
Helium, argon
•
Nitrogen
+5...+45°C
N26303
Synthetic oil
•
Natural gas
+5...+45°C
N30387
Synthetic oil
•
Industrial air
•
Helium, argon
•
Nitrogen
•
Natural gas
+10...+45°C
N22138
Mineral oil
•
Breathing air
•
Industrial air
+5...+45°C
Tab. 10 Lubrication oil list
BAUER special compressor oils can be delivered in the following packing units:
Volume Oil type
N28355 N26303 N30387 N22138
0.5-l cylinder N28355-0.5 --- --- N22138-0.5
1-l cylinder N28355-1 N26303-1 N30387-1 N22138-1
5-l can N28355-5 N26303-5 N30387-5 N22138-5
20-l can N28355-20 N26303-20 N30387-20 N22138-20
Tab. 11 Packing units - BAUER special compressor oils
OPERATING MANUAL Maintenance | 9
28.08.2019
A_002_en
87/150
To Next Page
Loading...
