Baumuller b maXX 5000 Application Handbook

Parameters
Application handbook Servo pump function V1 for BM5000
Document No.: 5.17002.02
65
of 76
6
177.125 Integral part PI controller
DINT -2147483648 to +2147483647
Integral part PI pressure controller
Scaling: 1073741824 Inc = Max. drive Speed (P110.13)
177.144 P Set value minimum
INT 0 to 32767
Limit for Pressure set value.
If actual Pressure is smaller than „P Act value minimum“ and set pressure is smaller than
„P Set value minimum“ then speed set value is set to 0.
Scaling: 32767 Inc = ZP177.6– or ZP177.7–
177.145 P Act value minimum
INT 0 to 32767
Limit for Pressure actual value. 
If actual Pressure is smaller than „P Act value minimum“ and set pressure is smaller than
„P Set value minimum“ then speed set value is set to 0.
Scaling: 32767 Inc = ZP177.6– or ZP177.7–
177.165 Pump protection rest waiting time
UDINT 0 to 65535 ms
Actual value for wait counter pump protection functionality
Scaling: 1 Inc = 1 ms
177.166 Pump protection recognition time
DS-support INT 100 to 10000 ms
Recognition time for wait counter pump protection functionality.
Scaling: 1 Inc = 1 ms

Baumuller b maXX 5000 Specifications

General

Brand	Baumuller
Model	b maXX 5000
Category	Servo Drives
Language	English