Baxi Fourtech Series User Manual

39
926.116.5 - en
INSTRUCTIONS FOR USERS
4. ADJUSTING AMBIENT TEMPERATURE AND DHW TEMPERATURE
The system must be equipped with an ambient thermostat for controlling the room temperature.
Adjust the ambient temperature (
) and the DHW temperature ( ) by pressing the respective +/- buttons (gure 1).
The ignition of the burner is shown on the display with the symbol (
) as described in section 3.1.
HEATING
While the boiler is operating in heating mode, the display (gure 1) shows the ashing symbol (
) and the heating de-
livery temperature (°C).
DOMESTIC HOT WATER
While the boiler is operating in DHW mode, the display (gure 1) shows the ashing symbol (
) and the DHW output
temperature (°C).
Press this button to set the following boiler operating modes:
t46..&3
t8*/5&3
t)&"5*/(0/-:
t0''
In SUMMER mode, the display shows (
). The boiler satises requests for DHW only while central heating is NOT ena-
bled (ambient frost protection function active).
In WINTER mode, the display shows (
and ). The boiler satises requests for both DHW and central heating (am-
bient frost protection function active).
In HEATING ONLY mode, the display shows (
). The boiler satises requests for central heating only (ambient frost
protection function active).
In OFF mode, the display shows neither of the above two symbols (
) ( ). In this mode only the ambient frost pro-
tection function is enabled, any other request for DHW or heating is not satised.
5. DESCRIPTION OF BUTTON (Summer - Winter - Heating Only - Off)

Baxi Fourtech Series Specifications

General

Brand	Baxi
Model	Fourtech Series
Category	Boiler
Language	English