105
Sun protection
Drives
Information
SE+ K5 mute drives with electronic
limit switching are characterised by
their very smooth and quiet opera-
tion. Sound-absorbing elements are
used to achieve low noise emission.
In order to detect the Retract limit
position, a permanent limit stop must
be present. In the Retract limit posi-
tion, the drive reverses to relieve the
stress on the fabric. The awning re-
mains closed during this process.
Setting the limit positions
The limit positions can be set in
2 different ways:
. Operator control unit
. Programming unit
The limit positions can be set via the
programming unit.
Connect the wires in the connect-
ing cable of the drive to the wires of
the same colour in the programming
unit.
Autoinstall
The SE+ K5 mute can automatical-
ly detect and program the optimum
maximum Extend limit position for
articulated-arm awnings via the
Autoinstall function.
To Next Page
Loading...
Need help?
General