109
Sun protection
Drives
Information
Setting the limit positions
The limit positions can be set in
3 different ways:
. Switch on drive
. Programming unit
. Operator control unit
Obstacle detection
In order to avoid uncontrolled
unwinding of the shading solution,
obstructions in the DOWN direction
are detected (such as wind load).
For the sensitive obstruction
detection to become active, the
drive adapter must be fitted with
obstruction detection on the drive
and the shading solution must have
a heavy end strip.
Drive adapter with
obstacle detection
Drive adapter
Fabric untensioning
When the fabric untensioning is
active, the drive moves slight-
ly downwards once it reaches the
upper limit position in order to
relieve the strain on the fabric.
Click
To Next Page
Loading...
