Becker M User Manual

133
Sun protection Drives
Setting the special function fabric untensioning
1. Activating/deactivating the
fabric untensioning function
On delivery, the fabric untensioning
function is deactivated on drive types
with a diameter of 35 mm, and is ac-
tivated on drive types with diameters
of 45 mm and 58 mm.
Run the shading solution towards the
upper stop
. Then press the pro-
gramming button until the drive
clicks once. Press the programming
button again and also the stop and
EXTEND button until the drive con-
firms activation or deactivation of the
fabric untensioning.
Setting the special function fabric stretching
1. Activate/deactivate the
fabric stretching function
Run the shading solution to the fabric
stretching position. Then press the
programming button, STOP button
and RETRACT button until the drive
signals to confirm the programming
operation.
To deactivate the fabric tensioning
function, press the EXTEND button
to move the drive to the fabric ten
-
sioning position then press the pro-
gramming button, STOP button and
RETRACT button again until the drive
signals to confirm the programming
operation.

Becker M Specifications

General

Brand	Becker
Model	M
Category	DC Drives
Language	English