Becker M User Manual

25
Roller shutter Drives
3. Deleting the limit positions
using the programming unit
- Press and hold the programming
button
- Press and hold the button
- Release the programming button
- Press the programming button again
until the drive clicks twice.
4. Deleting the limit positions
using any operator control
Run the drive for 6 seconds in the UP or
DOWN direction.
Then rapidly run through steps
to of
the deletion sequence shown opposite
until the drive clicks twice.
When using operator controls with
maintained operation mode, a STOP
command must be executed after every
short drive command.
Short! Short! Short! Short!
Short! Short! Short! Press
and
hold!

Becker M Specifications

General

Brand	Becker
Model	M
Category	DC Drives
Language	English