79
Sun protection
Drives
Switch off the retracting mecha-
nism. Using the flexible setting tool,
turn the adjuster for the Extend limit
position 3-10 revolutions in the - di-
rection (depending on how many
times the fabric is wrapped around
the tube when the shading solution
is extended).
2. Setting the Retract limit
position
Run the shading solution in the Ex-
tend direction until the drive switch-
es off automatically when the limit
switch for the Extend limit position is
reached.
Using the flexible setting tool, turn
the adjuster for the Extend limit po-
sition in the + direction (clockwise)
until the desired Extend position is
reached.
To Next Page
Loading...
Need help?
General