85
Sun protection
Drives
Information
PS(+) drives with electronic limit
switching detect and program the
Retract limit position automatically if
a permanent stop exists.
If no stop exists, a limit switch-off
point is programmed.
PS drives
PS drives are used to operate
screens, awnings and conservatory
shading.
PS+ drives
PS+ drives are used to operate
cassette awnings that require a
higher closing torque. The cassette
is always closed completely.
The limit positions can be set using
the programming unit or the switch
on the drive head.
Connect the wires in the connecting
cable of the drive to the wires of the
same colour in the programming unit.
To Next Page
Loading...
Need help?
General