94
Setting the limit positions via Autoinstall
Autoinstall with articulated
arm and cassette awnings
Run the shading solution in the
Extend direction until it passes
the Extend limit position and the
fabric is resting on the articulated
arms .
Then run the shading solution
without stopping in the Retract
direction until it stops automati-
cally at the upper stop .
Autoinstall (freely selectable
point at the bottom up to the
upper stop)
Run the shading solution to the de-
sired Extend limit position .
Then
run the shading solution without
stopping in the Retract direction
until it stops automatically at the
upper stop .
E12 drives
Nonstop
To Next Page
Loading...
Need help?
General