Beckman Coulter Multisizer 4 - Viewing Analysis Files

PN A51387AB
7-2
Working with Analysis Files
Viewing Analysis Files
• If you want to print a graph or listing as it appears on the screen, without changing Print Report
settings, select
RunFile > Print on the Run Menu bar.
Viewing Analysis Files
Changing the Display of an Open File
To change the display of an open analysis file:
1. Select View on the Run Menu bar (located at the top of the open analysis file).
2. In the View menu, select one display type:
Graph, Listing, or Interpolation.
3. In the View menu, select one analysis type:
Size (particle size), Pulse (pulse height and width),
or
Blockage Monitors (aperture resistance over time or by sequence).
Run Menu Behaviors
Graphs
If you select View > Graph, three menus will appear to the right of the View menu (Graph, Calculate,
and
Display). The Graph drop-down menu, and the options available in the Calculate drop-down
menu, will differ based on the analysis type you select (Size, Pulses, or Blockage Monitors).
Listings and Interpolation
If you select View > Listing or View > Interpolation, the drop-down menu to the right of the View
menu will change to Listing or Interpolation, respectively. Options available in the
Calculate drop-
down menu will vary depending on the analysis type you selected (
Size, Pulses, or Blockage
Monitors
).
Viewing Graphs
To display analysis results as a graph:
1. Select
View > Graph on the Run Menu bar.
2. Select the
View drop-down menu a second time and select the type of graph (Size, Pulses, or
Blockage Monitors).
Graph Menu
The Graph drop-down menu offers different options for X and Y axis values based on the type of
graph you select.