Beckman Coulter Multisizer 4 - Multisizer 4 Software Window

PN A51387AB
2-2
Software Overview
Multisizer 4 Software Window
2. Click
(
OK
)
.
If you do not want to connect on startup, you can select
Run > Connect to Multisizer 4 in the
Main Menu after you have opened the software.
NOTE
If the Administrator has selected a security mode that requires a username and password, a
Login window will appear when the software opens. If the user does not have a valid username
or password, it will be necessary to exit the system. For more information, see Logging In,
page 8-18.
Connecting to the Analyzer Using the Software Main Menu
To connect the software to the Analyzer, select Run > Connect to Multisizer 4 on the Main Menu bar.
Disconnecting from the Analyzer Using the Software Main Menu
To disconnect the software from the Analyzer, select Run > Disconnect from Multisizer 4 on the Main
Menu bar.
Multisizer 4 Software Window
The Multisizer 4 software window is illustrated below.
A Main Menu
B Main Toolbar
C Status Panel
D Viewing Area
E Run Menu
F Instrument Toolbar
G Status Bar