BEECHCRAFT Bonanza
V35, V35A & V35B thru D-9947
SectionV
Performance
COMMENTS PERTINENT TO THE USE OF
PERFORMANCE GRAPHS
1. The example, in addition to presenting an answer for
a particular set of conditions, also presents the order
in which the graphs should normally be used, i.e., if
the first item in the example is OAT, then enter the
graph at the known OAT.
2. The reference lines indicate where to begin following
guide lines. Always project to the reference line first,
then follow the guide lines to the next known item.
3. Indicated airspeeds (IAS) were obtained by using the
AIRSPEED CALIBRATION NORMAL SYSTEM Graph.
4. The associated conditions define the specific
conditions from which performance parameters have
been determined. They are not intended to be used
as instructions, however, performance values de-
termined from charts can only be achieved if
specified conditions exist.
5. The full amount of usable fuel is available for all
approved flight conditions.
January 1982
5-9
To Next Page