Section IV BEECHCRAFT Bonanza
V35, V35A & V35B thru D-9947 Normal Procedures
AFTER STARTING, AND TAXI
1. Brakes - RELEASE AND CHECK
2. Avionics Equipment - ON, AS REQUIRED
3. Lights - AS REQUIRED
CAUTION
Do not operate engine above 1200 RPM until
oil temperature reaches 75°F (24°C).
BEFORE TAKEOFF
1. Parking Brake - SET
2. Seat Belts and Shoulder Harnesses - CHECK
NOTE
All reclining seats must be in the upright posi-
tion during takeoff.
3. Avionics - CHECK
4. Engine Instruments - CHECK
5. Flight Instruments - CHECK AND SET
4-10
NOTE
To ensure adequate gyro pressure when oper-
ating two air-driven gyros during ground
operation and/or holding prior to takeoff. main-
tain an engine speed of 700-800 rpm in order
to hold a value in the green arc on the in-
strument pressure gage. With a requirement of
three or more airdriven gyros, maintain an
engine speed of 1200 rpm.
January 1982
To Next Page
Loading...