Section VIII BEECHCRAFT Bonanza
Handling, Serv - Maint V35, V35A & V35B thru D-9947
OVERHAUL OR REPLACEMENT SCHEDULE
The first overhaul or replacement should be performed not
later than the required period. The condition of the item at
the end of the first period can be used as a criterion for
determining subsequent periods applicable to the
individual airplane or fleet operation, providing the
operator has an approved monitoring system.
The time periods for inspection noted in this handbook are
based on average usage and average environmental
conditions.
SPECIAL CONDITIONS CAUTIONARY NOTICE
Airplanes operated for Air Taxi or other than normal
operation and airplanes operated in humid tropics or cold
and damp climates, etc., may need more frequent
inspections for wear, corrosion and/or lack of lubrication.
In these areas periodic inspections should be performed
until the operator can set his own inspection periods based
on experience.
8-48
NOTE
The required periods do not constitute a
guarantee that the item will reach the period
without malfunction, as the aforementioned
factors cannot be controlled by the
manufacturer.
January 1982
To Next Page
Loading...