Section VII BEECHCRAFT Bonanza
V35, V35A & V35B thru D-9947 Systems Description
POSITION INDICATORS (V35B)
The landing gear position indicator lights are located ad-
jacent to the landing gear switch handle. Three green
lights, one for each gear, are illuminated whenever the
landing gear are down and locked. The red light
illuminates any time one or all of the landing gear are in
transit or in any intermediate position. All of the lights will
be out when the gear are up.
Testing of the landing gear position indicator lights is ac-
complished by pressing the warning light test button on
the floating instrument panel. The intensity of the lamps is
automatically lowered for night flights when the naviga-
tion lights are turned on.
CIRCUIT BREAKER
The landing gear circuit breaker is located on the left sub-
panel of V35 and V35A models and on the right subpanel
of V35B models. It is a pull-and-reset type breaker. The
breaker will pop out under overload conditions.
SAFETY SWITCH
To prevent inadvertent retraction of the landing gear on
the ground, a main strut safety switch opens the control
circuit when the strut is compressed.
7-18
WARNING
Never rely on the safety switch to keep the gear
down during taxi or on take-off, landing roll, or
in a static position. Always make certain that
the landing gear switch is in the down position
during these operations.
January 1982
To Next Page
Loading...