BEECH CRAFT Bonanza
V35, V35A & V36B thru D-9947
Section IV
Normal Procedures
BALKED LANDING
1 . Power - FULL THROTILE, 2700 RPM
2. Airspeed - 70 kts;'81 mph until clear of obstacles,
then trim to normal climb speed
3. Flaps - UP
4. Landing Gear - UP
5. Cowl Flaps - OPEN
AFTER LANDING
1. Landing and Taxi Lights - AS REQUIRED
2. Flaps - UP
3. Trim Tab - SET TO 0°
4. Cowl Flaps - OPEN
SHUTDOWN
1 . Brakes - SET
2. Electrical and Radio Equipment - OFF
3. Propeller - HIGH RPM
4. Throttle - CLOSE
5. Mixture - IDLE CUT-OFF
6. Magneto;Start Switch - OFF, after engine stops
7. Battery and Alternator Switches - OFF
8. Control Lock - INSTALL, if conditions warrant.
9. Install wheel chocks and release brakes if the
airplane is to be left unattended.
January 1982
4-15