Beech Beechcraft Bonanza V35 - Propeller

Section II
Limitations
BEECH CRAFT Bonanza
V35, V35A & V35B thru D-994 7
PROPELLER
McCauley constant speed, two blade propeller
Hub: 2A36C23
Blades: 84B-O
Diameter: Maximum 84 in., Minimum 82 in.
Pitch settings at 30 in. sta.:
Low 13.3°, High - not under 29.2°
Spinner: McCauley D2822 or 03396 assembly
Governor: Woodward (C210452 or 0210680)
or
McCauley constant speed, three bladed propeller
Hub: 3A32C76
2-6
Blades: 82NB-2
Diameter: Maximum 80 in., Minimum 78.5 in.
Pitch settings at 30 in. sta.:
Low 13.3° ± 0.2°
High - not under 29.0° ± 0.5°
Spinner: McCauley 03584 assembly
Governor: Woodward (C210452 or 0210680)
NOTE
Other propellers are approved and are listed in
the FAA Aircraft Specification 3A 15 or are ap-
proved by Supplemental Type Certificate.
January 1982