BEECHCRAFT Bonanza Section VIII
V35, V35A & V358 thru D-9947 Handling. Serv- Maint
BRAKES
The brake hydraulic fluid reservoir 1s located on the
firewall in the engine compartment. A dipstick is attached
to the reservoir cap. Refer to Consumable Materials for
hydraulic fluid specification.
The brakes require no adjustments since the pistons move
to compensate for lining wear.
VACUUM SYSTEM (V35)
The vacuum system incorporates two screens; a relief
valve screen and an oil separator screen. These screens
should be cleaned every 100 hours. If the airplane is
operated in dusty conditions. the screens should be
cleaned more frequently.
Clean the suction relief valve screen by removing and
washing in cleaning solvent. Remove and clean the oil
separator screen by backflushing or submerging the unit in
cleaning fluid. Blow dry with air pressure.
The filter assemblies on the air driven instruments should
be replaced every 100 hours under normal operating
conditions, and more often if operated under duSty
conditions.
INSTRUMENT PRESSURE SYSTEM (V35A. V358)
The pressure system incorporates two filters; a pump in-
take filter is mounted on the rear engine baffle. The intake
filter should be inspected every 100 hours of normal
January 1982
8-21
To Next Page
Loading...