Beech Beechcraft Bonanza V35 - Landing Gear; Power Plant

BEECHCRAFT Bonanza Section VIII
V35, V35A& V35Bthru 0-9947 Handling, Serv- Maint
COMPONENT OVERHAUL OR REPLACE
LANDING GEAR
Main gear
Nose gear
Actuator assembly
Every 2000 hours
Every 2000 hours
All except -13
P,,N 35-810075-13
Retract motor
Retract motor brushes
Every 2000 hours
Every 4000 hours
Every 1000 hours
Every 500 hours or on
condition
Shimmy damper
Wheels and tires
Brake assembly
Brake lining
Master cylinder
Shuttle valve assembly
Parking brake valve
All hose
Every 1000 hours
On condition
On condition
On condition
On condition
On condition
On condition
On condition
POWER PLANT
NOTE
When an engine has been overhauled, or a
new engine installed, it is recommended that
low power settings not be used until oil
consumption has stabilized. The average time
for piston ring seating is approximately 50
hours.
Engine
I0-520-B
I0-520-BA
I0-520-BB
Engine controls
January 1982
*Every 1500 hours
*Every 1500 hours
*Every 1500 hours
On condition
8-49