BEECH CRAFT Bonanza Section VIII
V35, V35A & V35B thru D-9947 Handling, Serv- Maint
MINOR MAINTENANCE
RUBBER SEALS
To prevent sticking of the rubber seals around the
windows, doors, and engine cowling, the seals should be
coated with Oakite 6 compound. The compound is
noninjurious to paint and can be removed by employing
normal cleaning methods.
ALTERNATOR
Since the alternator and voltage regulator are designed for
use on only one polarity system, the following
precautionary measures must be observed when working
on the charging circuit, or serious damage to the electrical
equipment will result
1. When installing a battery, make certain that the
ground polarity of the battery and the ground polarity
of the alternator are the same.
2. When connecting a booster battery, be sure to connect
the negative battery terminals together and the
positive battery terminals together.
3. When using a battery charger, connect the positive
lead of the charger to the positive battery terminal and
the negative lead of the charger to the negative battery
terminal.
4. Do not operate an alternator on open circuit. Be sure
all circuit connections are secure.
5. Do not short across or ground any of the terminals on
the alternator or voltage regulator.
6. Do not attempt to polarize an alternator.
January 1982
8-25
To Next Page
Loading...