BEECHCRAFT Bonanza
V35, V35A & V35B thru 0-9947
Section VII
Systems Description
Drain and replace the engine oil as recommended in
HANDLING, SERVICING AND MAINTENANCE. If operating
conditions are unusually dusty or dirty, more frequent oil
changes may be necessary. Oil changes are more critical
during the break-in period than at any other time.
Use full throttle at recommended rpm for every take-off
and maintain until at least 400 feet AGL, then reduce as
necessary for cruise climb or cruise. Maintain the highest
power recommended for cruise operations during the
break-in period, avoiding altitudes above 8000 feet. Inter-
rupt cruise power every 30 minutes or so by smoothly ad-
vancir1g· to take-off power settings for about 30 seconds,
then returning to cruise power settings.
Avoid long power-off descents especially during the break-
in period. Maintain sufficient power during descent to
permit cylinder head temperatures to remain in the green
arc.
Minimize ground operation time, especially during warm
weather. During the break-in period, avoid engine idling in
excess of 15 minutes, especially in high ambient
temperatures.
January 1982
7-43
To Next Page
Loading...