BEECHCRAFT Bonanza
V35, V35A & V358 thru D-9947
INTRODUCTION
This Pilot's Operating Handbook and FAA Approved Air-
plane Flight Manual is in the format and contains data
recommended in the GAMA (General Aviation Manu-
facturers Association) Handbook Specification Number 1.
Use of this specification by all manufacturers will provide
the pilot the same type data in the same place in all of the
handbooks.
In recent years BEECHCRAFT handbooks contained most
of the data now provided, however, the new handbooks
contain more detailed data and some entirely new data.
For example, attention is called to Section X SAFETY IN-
FORMATION. BEECHCRAFT feels it is highly important to
have SAFETY INFORMATION in a condensed form in the
hands of the pilots. The SAFETY INFORMATION should be
read and studied. Periodic review will serve as a reminder
of good piloting techniques.
WARNING
Use only genuine BEECHCRAFT or BEECH CRAFT approved
parts obtained from BEECHCRAFT approved sources, in
connection with the maintenance and repair of Beech
airplanes.
Genuine BEECHCRAFT parts are produced and inspected
under rigorous procedures to ensure airworthiness and
suitability for use in Beech airplane applications. Parts
purchased from sources other than BEECHCRAFT, even
though outwardly identical in appearance, may not have
had the required tests and inspections performed, may be
different in fabrication techniques and materials, and may
be dangerous when installed in an airplane.
Revised: March 1983 a
To Next Page
Loading...